
Glossary
This glossary de
fi
nes the terms used in this guide or related to this product. It is not a comprehensive
glossary of computer terms.
ALB
Adaptive Load Balance (ALB) is a feature provided by the EVA DSM that utilizes
certain features supported by the array, to deliver better performance for host
I/O requests.
controller
A hardware device that facilitates communication between a host and one
or more LUNs organized as an array.
DSM
Device Speci
fi
c Module
fabric
A network that contains high-speed
fi
ber connections resulting from the
interconnection of switches and devices. A fabric is an active and intelligent
non-shared interconnect scheme for nodes.
failover
The automatic substitution of a functionally equivalent system component for
a component that has failed.
HBA
Host Bus Adapter. An I/O device that serves as the interface connecting a host
system to the SCSI bus or SAN (Storage Area Network)
host
The computer system on which the Multipath software is running.
LUN
Logical Unit Number. The actual unit number assigned to a device by the RAID
system controller.
mode
A user-selectable parameter that speci
fi
es path behavior during normal and
failure conditions. Paths can be set to one of the following modes:
•
Preferred
— Indicates the path you choose for the desired I/O paths. When
a path is in preferred mode, load balance is not enabled and the Load
Balance Type displays as
none
.
•
Alternate
— Indicates a path that is used for device access and I/O activities
when the preferred path fails.
MPIO
Multipathing Input/Output.
path
A virtual communication route that enables data and commands to pass
between a host server and a storage device.
path state
An attribute that describes the operational condition of a path. A path can exist
in one of the following states:
•
Active
— Path is currently used for the I/O stream or is available for load
balancing.
•
Available
— Path is currently available, but not used for device access. The
path is only in this state when no load balancing policy has been selected
for the LUN.
•
Standby
— Intermediate state of the path before it is initialized (made ready
for device access), normally will not be seen.
•
Failed
— Path is currently unusable for the I/O stream.
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
51
Summary of Contents for MPIO
