HP MPIO, Installation And Reference Manual, Page: 28 / 53

hpdsm devices all
Syntax:
hpdsm devices all
The
hpdsm devices all
command displays information of the device, followed by their path
information as shown in the following example. If there are no devices, the following message is
displayed:
No devices found
.
NOTE:
See hpdsm set device policy for a de fi nition of the policies. The P.B.T.L. column shows the device p ort,
b us, t arget, and L UN.
Example:
hpdsm devices all
Device# Device Name Serial No.
Active
Paths
Policy Disk# P.B.T.L ALB
1 HP HSV210 6005008B400101F6000170000 2 SQST Disk1 4.0.2.3 N
Path# Controller Port# State HBA Slot# RTP P.B.T.L
1 P898DXAAQQO101U-2 Active 7 00010002 3.0.2.3
2 P898DXAAQQO101U-2 Active 6 00010002 4.0.2.3
Device#
Device Name Serial No.
Active
Paths
Policy
Disk#
P.B.T.L ALB
2 HP HSV210 6005008B400101F600018000 2 SQST Disk2 3.0.2.4 N
Path# Controller Port# State HBA Slot# RTP P.B.T.L
1 P898DXAAQQO101U-2 Active 7 00010002 3.0.2.4
2 P898DXAAQQO101U-2 Active 6 00010002 4.0.2.4
hpdsm paths device
Syntax:
hpdsm paths device=x
The
hpdsm paths device
command displays information about the paths available for device
x
, as
shown in the following example.
NOTE:
•
The P.B.T.L. column shows the device p ort, b us, t arget, and L UN.
• The RTP column shows the target port information as de fi ned by SCSI-3 speci fi cation.
• The Controller Port# column shows the controller serial number followed by target port number.
28
Managing storage arrays using the HP MPIO EVA DSM with the CLI utility