
1.
At the command prompt, type the following command:
<CMD> setup.exe /r
, where
/r
option enables the record mode.
2.
This will result in the GUI installation to run in the record mode. Select the responses in each
screen and run through the installation.
NOTE:
When selecting the response on each screen, do not click the
BACK
button, and modify the selection.
The response
fi
le will have to be generated again in such a case.
3.
The response
fi
le is created at the following location:
%WINDDIR%\setup.iss
, where,
%WINDIR%
is the Windows installation directory.
4.
Use this
setup.iss
fi
le to perform the same silent mode operation on multiple systems across
the same platform.
Setting up boot from SAN
HP MPIO EVA DSM can be set up to boot externally from a SAN that uses HP StorageWorks HBAs and
RAID arrays. Booting externally offers the following advantages:
•
Optional elimination of server-based internal boot devices
•
Decreased downtime in the event of a server failure
Booting from a SAN requires speci
fi
c setup procedures based on the speci
fi
c software solutions, HBA
fi
rmware, and boot BIOS versions. See the following documents for detailed information about booting
from a SAN:
•
HP StorageWorks Booting 32-bit Windows systems and Windows Server x64 Edition
systems from a Storage Area Network application notes
, available at this web site:
http://h18006.www1.hp.com/products/storageworks/san/documentation.html
•
HP StorageWorks Booting Itanium 64-bit Windows Systems from a Storage Area Network
application notes
, available at this web site:
http://h18006.www1.hp.com/products/
storageworks/san/documentation.html
18
Installing the HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays
Summary of Contents for MPIO
