HP MPIO, Installation And Reference Manual, Page: 27 / 53

5 Managing storage arrays using
the HP MPIO EVA DSM with the CLI
utility
The command line interface utility (CLI) of HP MPIO EVA DSM enables you to monitor and manage
multipathing devices. This chapter describes the following CLI commands:
• hpdsm devices
• hpdsm devices all
• hpdsm paths device
• hpdsm set device policy
• hpdsm set device alb
• hpdsm set device path
• hpdsm cleanup device
• hpdsm notify
• hpdsm help
hpdsm devices
Syntax:
hpdsm devices
The
hpdsm devices
command displays information about the HP MPIO devices as shown in the
following example. If there are no devices present, the following message is displayed:
No devices
found
.
NOTE:
See hpdsm set device policy for a de fi nition of the policies. The P.B.T.L. column shows the device p ort,
b us, t arget, and
L UN.
Example:
hpdsm devices
Device#
Device
Name
Serial No.
Active
Paths
Policy Disk#
P.B.T.L ALB
1 HP HSV210 600508B400101F6A000070001D950000 9
SQST
Disk 10 4.0.1.1
Y
2 HP HSV210 600508B400101F6A000070001D9B0000 9 SQST Disk 11 4.0.1.2 N
3 HP HSV210 600508B400101F6A000070001DA10000 9
RR
Disk 12 4.0.1.3
Y
4 HP HSV210 600508B400101F6A000070001E160000 9 SQR Disk 13 3.0.2.4 Y
5 HP HSV210 600508B400101F6A000070001E1C0000 9
NLB
Disk 14 2.0.2.5
N
6 HP HSV210 600508B400101F6A000070001E220000 9 NLB Disk 15 2.0.2.6 N
7 HP HSV210 600508B400101F6A000070001E280000 9
SQST
Disk 16 3.0.2.7
N
8 HP HSV210 600508B400101F6A000070001E2E0000 9 SQST Disk 17 3.0.2.8 N
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
27