HP MPIO, Installation And Reference Manual, Page: 39 / 53

Event ID Message
Description
Contents of the
data dump
37
DSM_name is attempting an
operation on pseudo-LUN .
The Type is noted in the
dump data.
DSM_name has called
DSMNoti fi cation on a
pseudo-LUN.
The type of
noti fi cation called
by DSM
38
A device under pseudo-LUN ,
being controlled by
DSM_name was removed,
but the DSM failed the
operation.
An MPIO call to DSM’s
RemoveDevice operation failed.
DSM ID of the failed
attempt
HP MPIO EVA DSM event log messages
Table 5 lists the HP MPIO EVA DSM event log messages and provides a description of each message.
Table 5 HP MPIO EVA DSM event log messages
Event ID Message Description
101
Discovered a new multipath
capable disk with serial
number X; first path SCSI
address Y.
A new multipath disk has been discovered. X
represents the serial number of the new disk. Y is
the SCSI address of the fi rst path to this disk.
102
A new path (SCSI address
Y) was added to existing
multipath capable disk X.
A new path to an existing multipath disk has been
discovered. X represents the serial number of the
disk. Y is the SCSI address of the new path that
was found.
103
The path (SCSI address Y)
to multipath capable disk
X has recovered.
A failed path to an existing multipath disk has
recovered. X represents the serial number of the
disk. Y is the SCSI address of the path that has been
recovered.
107
The preferred path (SCSI
address Y) for multipath
capable disk X has been
restored.
A previously selected path has been restored as the
preferred path for I/O operation. X represents the
serial number of the disk. Y is the SCSI address of
the preferred path that has been restored.
108
The DSM has completed
remove processing for
path (SCSI address Y) to
multipath capable disk X.
The DSM has completed processing the removal
noti fi cation for a path to a given multipath disk. X
represents the serial number of the disk. Y is the
SCSI address of the path for which the removal
noti fi cation has been processed.
109
The DSM (version X) has
been started successfully.
The DSM has successfully completed the initialization
during startup. X is the version of the DSM.
110
The previously failed
multipath capable disk X
has recovered.
This message is logged when the DSM detects that
a previously failed (inoperative) multipath capable
disk with serial number X has recovered and
become operational again.
111
The removal event
notifications for
multipath capable disk
X have been disabled upon
request.
This event is logged when generation of removal
event noti fi cations (Event IDs 304, 302 and 108) for
the multipath capable disk with serial number X has
been disabled upon request in the DSM.
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
39