HP MPIO, Installation And Reference Manual, Page: 30 / 53

hpdsm set device alb
Syntax:
hpdsm set device=x alb=y/n
Syntax:
hpdsm set device=all alb=y/n
The
hpdsm set device alb
command changes the Adaptive Load Balance setting for the device
x
or for
all
the devices, depending on the input parameter speci fi ed.
Example:
hpdsm set device=1 alb=y
Device Name : HP HSV210
Device Serial No. : 600508B400101F6A000070001D950000
Change Adaptive Load Balance setting (y/n)? y
ALB settings changed. Verify by using "hpdsm devices" command.
Example:
hpdsm set device=all alb=y
Successful for all the devices. Verify by using "hpdsm devices" command.
hpdsm set device path
Syntax:
hpdsm set device=x path=y
The
hpdsm set device path
command changes the preferred path for device
x
, as shown in the
example below.
NOTE:
Use the
hpdsm paths device
command to view the available paths for the device.
hpdsm set device=1 path=1
Device Name : HP HSV210
Device Serial No. : 600508B400101F6A000070001D950000
Controller Port No. : P8398DXAAQQ013
Change Load Balance policy (y/n)? y
Preferred Path changed. Verify by issuing "hpdsm paths device=<number>" command.
hpdsm cleanup device
Syntax:
hpdsm cleanup device=x
Syntax:
hpdsm cleanup device=all
The
hpdsm cleanup device
command allows you to clean up the failed path information for a
speci fi ed device
x
, as shown in the example below.
Example:
30
Managing storage arrays using the HP MPIO EVA DSM with the CLI utility