b.
In the password field, enter the password. The default
password is Admin. The Main Menu screen appears.
7.
Enter the product ID and serial number. The product ID and 10-
digit serial number are located on a label inside the rear MCS
unit door.
a.
From the Main Menu screen, enter
3 Factory Default
.
The Default Product Identification screen appears.
b.
To set the product ID, enter
2 Product ID MCS
.
c.
To set the serial number, enter
3 Serial Number MCS
.
d.
To return to the Main Menu screen, press
Esc.
8.
Access the HP Modular Cooling System Configuration Utility.
a.
From the Main Menu screen, enter
1 Network
Configuration
. The Menu Network Configuration
screen appears.
b.
Enter
1 IP Configuration
. The IP Configuration screen
appears.
c.
To disable DHCP, enter
4 Enable/Disable DHCP
.
d.
Enter
1 IP Address,
and then enter the new IP address.
e.
Enter
2 IP Subnet mask,
and then enter the IP subnet
mask.
f.
Enter
3 IP Def. Router,
and then enter the gateway.
9.
Activate the values.
a.
Return to the Main Menu Network Configuration screen.
