manualshive.com logo in svg

HP Laptop, User Manual, Page: 105 / 130

Share
Download
HP Laptop User Manual Download Page 105

12 Computer Setup (BIOS), MultiBoot, and 

HP PC Hardware Diagnostics (UEFI)

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input 

and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). 

Computer Setup includes settings for the types of devices installed, the startup sequence of the 

computer, and the amount of system and extended memory.

NOTE:

Use extreme care when making changes in Computer Setup. Errors can prevent the 

computer from operating properly.

Starting Computer Setup

NOTE:

An external keyboard or mouse connected to a USB port can be used with Computer Setup 

only if USB legacy support is enabled.

To start Computer Setup, follow these steps:

1.

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup 

Menu” message is displayed at the bottom of the screen.

2.

Press 

f10

 to enter Computer Setup.

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:

1.

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup 

Menu” message is displayed at the bottom of the screen.

NOTE:

You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the 

keyboard to navigate and make selections in Computer Setup.

2.

Press 

f10

 to enter Computer Setup.

ENWW

Using Computer Setup 93

Summary of Contents for Laptop



































































































































Reviews:

No comments