HP Kayak XU800 Series, Technical Reference Manual

Page: 9 / 140

9
1
System Overview
This manual describes the HP Kayak XU800 PC Workstation and provides
detailed system specifications.
This chapter introduces the external features, and lists the specifications
and characteristic data of the system. It also provides a summary of the
documentation available.
HP Kayak XU800 PC Workstation Overview
The HP Kayak XU800 PC Workstation
is based on the Extended ATX
(E-ATX) form factor.
The following table provides an overview of the system.
Feature Description
System Board
E-ATX with a dimension of 12.8-inch x 11.4-inch.
Processor
All models have support for up to two Intel Pentium® III processors.
For Processor 1, a VRM (Voltage Regulator Module) is integrated on the
system board, while there is a VRM socket for a second processor.
Cache Memory
(integrated in processor
package) •
Level-One: 16 KB code, 16 KB data.
•
Level-Two: i256 KB.
Internal CPU Clock Rate
External Processor Bus
533 MHz, 600 MHz, 667 MHz, 733 MHz, 800 MHz and higher.
133 MHz Front Side Bus
.
Chipset
Intel® Chipset (I840) including, Input/Output Controller Hub (ICH), PCI 64-bit
Hub (P64H), FirmWare Hub (FWH) and Memory Repeater Hub (MRH-S) for
SDRAM support.
Super I/O Chip
NS 87364.
BIOS (Basic Input/Output
System)
Based on the core of AMIBIOS, including:
•
4 M/bits of flash memory.
•
Support for PCI 2.2 Specification.
•
Support for RDRAM or SDRAM memory modules.
Firmware - BIOS
Flash EEprom: Intel’s Firmware hub concept.