120
6 Tests and Error Messages
Order in Which POST Tests Are Performed
50h
Memory below 1 MB has been tested and initialized. Adjusting the displayed memory size
for relocation and shadowing.
51h
Memory size display was adjusted for relocation and shadowing. Testing the memory
above 1 MB.
52h
Memory above 1 MB has been tested and initialized. Saving the memory size information.
53h
Memory size information and CPU registers are saved. Entering real mode.
54h
Shutdown was successful. The CPU is in real mode. Disabling the Gate A20 line, parity,
and the NMI.
57h
The A20 address line, parity, and the NMI disabled. Adjusting the memory size depending
on relocation and shadowing.
58h
Memory size was adjusted for relocation and shadowing. Clearing the
Hit
<DEL>
message.
59h
The
Hit
<DEL> message is cleared. The <WAIT> message is displayed. Starting the
DMA and Interrupt controller test.
60h
DMA page register test passed. Performing the DMA controller 1 base register test.
62h
DMA controller 1 base register test passed. Performing the DMA controller 2 base register
test.
65h
DMA controller 2 base register test passed. Programming DMA controllers 1 and 2.
66h
Completed programming DMA controllers 1 and 2. Initializing the 8259 interrupt controller.
62h
Test extended memory address lines
7Fh
Extended NMI source enabling is in progress.
80h
Keyboard test has started. Clearing the output buffer and checking for stuck keys. Issuing
the keyboard reset command.
81h
Keyboard reset error or stuck key was found. Issuing the keyboard controller interface test
command.
82h
Keyboard controller interface test completed. Writing the command byte and initializing
the circular buffer.
83h
Command byte was written and global data initialization has completed. Checking for a
locked key.
84h
Locked key checking is over. Checking for memory size mismatch with CMOS RAM data.
Checkpoint
Code
POST Routine Description (Continued)
(A Check Point Code is NOT an error code or error number)
Summary of Contents for Kayak XU800 Series
