HP Kayak XU800 Series Technical Reference Manual Download Page 11

Page: 11 / 140

1 System Overview

HP Kayak XU800 PC Workstation Overview

Video Controllers

Models include either:

•

ELSA GLoria Synergy® II AGP video controller with 32 MB of installed
SGRAM video memory (maximum configuration).

•

Matrox® Millennium G250 AGP video controller with
8 MB SGRAM video memory which can be upgraded to 16 MB.

•

Matrox Millennium G400-Dual monitor AGP video controller with
16 MB SGRAM video memory (maximum configuration).

•

3Dlabs Oxygen® GVX1, 32 MB SGRAM video memory (maximum configu-
ration).

Accessory Card Slots

All models have:

•

One Universal AGP Pro 4X 50 W 32-bit slot. The AGP bus provides a high
performance graphics interface.

•

Three 32-bit 33 MHz PCI

slots: 1, 2 and 5 (5 V).

•

Two 64-bit 66 MHz PCI slots: 3 and 4 (3.3 V).

The majority of the configurations are delivered with PCI slots 1 to 4 vacant.

LAN Card

All models are supplied with an HP 10/100BT PCI Ethernet Adapter LAN card
installed in PCI slot 5, supporting Wake-On LAN (WOL) and PCI 2.2
Specification.

CD-ROM Drive

Models include either an IDE 48X CD-ROM, CD-RW drive or DVD drive.

Audio

Integrated on the system board CS4280 audio PCI chip and AC97 Codec
(CS4297) audio.

HP UltraFlow Cooling
System

Cooling system with multiple temperature-regulated fans to optimize cooling.
Alert reporting to MaxiLife and TopTools.

1. All five PCI slots comply with the PCI Specification 2.2.

Feature

Description

Summary of Contents for Kayak XU800 Series













































































































































Search results

Summary of Contents for Kayak XU800 Series

Reviews:

Related manuals for Kayak XU800 Series

Brands by name

Popular brands

HP Kayak XU800 Series, Technical Reference Manual

Search results

Summary of Contents for Kayak XU800 Series

Reviews:

Related manuals for Kayak XU800 Series

Brands by name

Popular brands