2-9
Installing the Switch 4200vl Series
Installation Procedures
In
sta
llin
g
th
e
Switc
h
4200vl
Se
ries
Figure 2-1. Installing a module
Figure 2-2. Tighten module retaining screws
for best results,
push near both screws
insert module into the
guides and slide it in until
it is fully inserted
“Low-force” connector.
High insertion force is not
needed and should not be used
tighten the retaining screws on
the module until they are secure,
but do not overtighten them
the module is fully inserted when
the module bulkhead is contacting,
or very close to contacting
the face of the switch
