2-11
Installing the Switch 4200vl Series
Installation Procedures
In
sta
llin
g
th
e
Switc
h
4200vl
Se
ries
Figure 2-3. Installing a power supply
Once the power supply is installed, ensure you tighten the four retaining
screws that hold it in place. The screws can be tightened with either a flat-
bladed or Torx T-10 screwdriver. Be careful to not overtighten the screws.
Figure 2-4. Tighten power supply retaining screws
Insert the power supply into
the opening, then slide it all the
way in until it connects to the
switch. The power supply face
plate will be flush with the
back face of the switch.
tighten the four screws
