2.
Attach barrel nuts
(D)
to the rear columns.
Item Reference
1 SEU
outline
2
Positions for mounting the cable management arm (refer
to step 7)
3
Positions for mounting the rear of the slides (refer to step
3)
4 Server
3.
Install the right and left slides into the rack. Do not
tighten the outer screws.
4.
Remove and discard the center screw, allowing the slide
to lower slightly, and then tighten the outer screws.
5.
Place the server on the slides using a lift kit.
WARNING:
The weight of this product requires a lift
to install. Do not manually lift the server to install it.
Use a lift that can handle the load of your server.
Summary of Contents for J1530C
Page 5: ......