Hardware
Included
Tools Required
Not Included
FH-4WH
Flush mount wheel hangers set
Thank you for purchasing our Flush mounted wheel hangers.
This product is intended for storage of wheels with tires weighing up to 120lbs each.
Please read these instructions from start to finish before beginning.
-We are not liable for damages caused by improper installation or misuse of this product.
-Not recommended for Seismic zones 3 or higher.
-Always check/detect routing of pipes and electrical before penetrating/drilling walls.
-Clear the installation space of vehicles or valuables before beginning.
Drywall with Wood Studs
Masonry
(concrete/brick)
1 /2”
Ratchet
Tape Measure
Drill
3 /16” Drill bit
1 /2” Drill bit
Stud Finder
Hammer
(8x)
Lag Bolts
(8x)
Lag Shield
(8x)
Bolt caps
Parts
Included
Safety Glasses
Or
Common
Pencil
