HP Integrity BL890c - i2 Server Installation Manual Download Page 13

Page: 13 / 52

Status

Description

Item

Green = Server blade is powered on

Amber = Standby (auxiliary power
available)*

Off = Off

Blade power LED

Green flashing = iLO Active
Amber flashing = iLO failure

Off = No standby voltage

iLO Heartbeat

Not shown (behind grill)

*If the Onboard Administrator denies power to the server blade, the server blade returns to
Standby mode.

SAS disk drive LEDs

There are two disk drives on the BL860c i2 Server Blade. They have identical LEDs that display
the drive status.

Description

Item

Fault/UID LED (amber/blue)

Online LED (green)

SAS hard drive LED combinations

NOTE:

Predictive failure alerts only occur when the hard drive is connected to a Smart Array

controller.

Interpretation

Fault/UID LED (amber/blue)

Online/activity LED (green)

The drive has failed, or a predictive
failure alert has been received for this
drive; it also has been selected by a
management application.

Alternating amber and blue

On, off, or flashing

The drive is operating normally, and
it has been selected by a management
application.

Steadily blue

On, off, or flashing

A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.

Amber, flashing regularly (1 Hz)

The drive is online, but it is not active
currently.

Off

Overview

Summary of Contents for Integrity BL890c - i2 Server





















































Search results

Summary of Contents for Integrity BL890c - i2 Server

Reviews:

Related manuals for Integrity BL890c - i2 Server

Brands by name

Popular brands

HP Integrity BL890c - i2 Server, Installation Manual

Search results

Summary of Contents for Integrity BL890c - i2 Server

Reviews:

Related manuals for Integrity BL890c - i2 Server

Brands by name

Popular brands