a.
Run the following commands from the active Fusion Manager (r150b15 in this example)
to view the existing servers and then unregister the passive Fusion Manager (r150b16
in this example):
To view the registered management consoles:
[root@r150b15 ibrix]#ibrix_fm -l
The command provides the following output:
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
r150b16 172.16.3.16
To unregister a Fusion Manager that has been uninstalled:
[root@r150b15 ibrix]#ibrix_fm -u r150b16
In this instance, r150b16 is the management console that has been unregistered.
The following output is provided:
Command succeeded!
Notice that when you run the
ibrix_fm -l
command, r150b16 is no longer listed.
[root@r150b15 ibrix]#ibrix_fm -l
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
b.
Run the following command to install the passive Fusion Manager:
/usr/local/ibrix/sbin/setupfm --install -P /usr/local/ibrix -C
bond1 -w 9009 -M passive -v 172.16.3.65 -m 255.255.248.0 -d
bond1:0
(Optional) Run the following command to register Fusion Manager:
/usr/local/ibrix/sbin/setupfm --registerFM -P /usr/local/ibrix
-C bond1 -v 172.16.3.65 -w 9009
c.
If registered, verify the registered Fusion Manager on the active Fusion Manager node
by entering the following command:
[root@r150b15 ibrix]#ibrix_fm -l
In command displays the following output:
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
r150b16 172.16.3.16
d.
Verify that the newly installed node is registered as the passive Fusion Manager by
entering the following command:
[root@r150s16 ~]#ibrix_fm -i
The command displays the following output:
FusionServer: r150s16 (passive) Active FM: 172.16.3.15
168 Recovering the X9720/9730 Storage
