HSG80 Array Controller V8.7 Maintenance and Service Guide
2–13
Common Replacement Information and Procedures
Figure 2–8: DIMM components
Removing DIMMs
Use the following steps to remove a DIMM from a cache module:
1. Remove the cache module using steps in either Chapter 3 or Chapter 4.
2. Press down on the DIMM retaining clips
3
at both ends of the DIMM
1
being
removed (see Figure 2–8).
NOTE: To make pressing down on the DIMM retaining clips easier, use the eraser end of a
pencil or a small screwdriver.
3. Gently remove the DIMM from the DIMM slot
2
and place the DIMM in an
antistatic bag or on a grounded antistatic mat.
4. Repeat step 2 and step 3 for each DIMM.
1
DIMM
2
DIMM slot
3
DIMM retaining clip
CXO6577B
3
2
1