manualshive.com logo in svg

HP High-Performance Secure Hard Disk, Setup Manual

Share
Download
HP High-Performance Secure Hard Disk Setup Manual Download Page 41

Hard Disk Drive Status

Meaning/Description

Recommended Action

Hard Drive:

Serial Number:

Drive Status:

Encryption Status:

Internal (not encryptable)

0987654321

Disabled

Expected drive missing

Incorrect hard disk installed.

Standard (non-encrypted) hard
disk is installed. However, an
HP Secure Hard Disk was
previously locked to this
printer/MFP.

Install the correct HP Secure
Hard Disk for this printer/MFP. Or,
select 

Disable encryption and

continue

.

CAUTION:

All data on the

HP Secure Hard Disk previously
locked to this printer/MFP is
unreadable.

Hard Drive:

Serial Number:

Drive Status:

Encryption Status:

Internal (not encryptable)

0987654321

Disabled

Unsupported drive

Incorrect hard disk installed.

Installed secure hard disk cannot
be encrypted.

This HP printer/MFP only
supports a genuine HP Secure
Hard Disk. Install the correct hard
disk.

Hard Drive:

Serial Number:

Drive Status:

Encryption Status:

Internal (not encryptable)

0987654321

Not functional

Not applicable

Hard disk is not functional.

NOTE:

The hard disk has

encountered a serious error.

Turn the printer/MFP off and
check all power and interface
cables. Then, restart the
printer/MFP. If the error
continues, contact HP Support.

Table 4-3

  Error Messages (continued)

ENWW

Embedded Web server messages

35

Summary of Contents for High-Performance Secure Hard Disk























































Reviews:

No comments

Brands by name

Popular brands

Load more brands