HP High-Performance Secure Hard Disk, Setup Manual

Page: 39 / 54

Embedded Web server messages
Use the HP embedded Web server to review status messages.
1. Start a supported Web browser and enter the IP address or host name of the printer/MFP as the
URL.
2. From the HP embedded Web server page, select the Settings tab, and then select Security .
3. In the Hard Drive and Mass Storage Security Settings section, select Configure .
The HP Secure Hard Disk status is displayed, which includes the type, serial number, drive status,
and encryption status.
NOTE: If you installed the HP Secure Hard Disk in an existing printer/MFP, and the hard disk
status does not display the Hard Disk , Drive Status , and Encryption Status fields, this might
indicate that the printer/MFP is not using the latest firmware version. Verify that the printer/MFP is
capable of supporting an HP Secure Hard Disk, and that the firmware is current.
4. Use the following information to resolve any issues.
NOTE: Messages are displayed in the section titled HP Encrypted Hard Drive Configuration . If the
printer/MFP is capable of managing an HP Secure Hard Disk, the first message in the section states,
This device allows storage encryption when an HP Encrypted Hard Drive is installed .
Although the Hard Drive field in the table displays EIO or Internal, the information provided can apply
to either type.
For clarity, the table describes only status messages for the HP Secure Hard Disk. However, the Hard
Drive Status section of the HP embedded Web server lists all installed hard disks.
The messages listed in the following table indicate normal operating conditions, and generally do not
require attention.
Table 4-1 Normal Operation Messages
Hard Disk Drive Status Meaning/Description Recommended Action
Hard Drive:
Serial Number:
Drive Status:
Encryption Status:
None installed
Not applicable
Not applicable
Not applicable
No hard disk installed.
However, this printer/MFP can
manage an HP Secure Hard Disk.
Verify that Automatically enable
encryption... is selected, and
install the HP Secure Hard Disk.
Hard Drive:
Serial Number:
Drive Status:
Encryption Status:
Internal (not encryptable)
0987654321
Enabled
Not supported
Standard (non-encrypted) hard
disk is installed.
However, this printer/MFP can
manage an HP Secure Hard Disk.
Verify that Automatically enable
encryption... is selected, and
install the HP Secure Hard Disk.
Hard Drive:
Serial Number:
Drive Status:
Encryption Status:
EIO 1 (encryptable)
0987654321
Enabled
Encrypted
Encryption is enabled and hard
disk is functioning correctly. None.
ENWW Embedded Web server messages 33