
NOTE:
To prevent formatter board damage, ensure that it is properly aligned in the tracks.
10.
For the HP LaserJet CM3530, replace the thumb screws and carefully tighten them.
11.
For the HP LaserJet CP6015, press the formatter board until the tabs lock the board in place.
12.
Reconnect the power and all interface cables and turn the printer/MFP on.
13.
Continue with
Confirm HP Secure Hard Disk operation on page 19
.
Confirm HP Secure Hard Disk operation
Use the HP embedded Web server to confirm that the HP Secure Hard Disk is operating correctly.
NOTE:
Use this section to
initially
verify printer/MFP operation after an installation. Otherwise, use
Troubleshooting on page 29
.
You can also use the printer configuration page to verify the installation.
1.
Start a supported Web browser and enter the IP address or host name of the printer/MFP as the
URL.
See the setup or use guides provided with your printer/MFP for additional information about the
HP embedded Web server.
2.
From the HP embedded Web server page, select the
Settings
tab, and then select
Security
.
3.
In the
Hard Drive and Mass Storage Security Settings
section, select
Configure
.
The HP Secure Hard Disk status is displayed, which includes the type, serial number, drive status,
and encryption status, as in the following example:
Hard Disk:
Internal (encryptable)
Serial Number:
ABCDE1234567890abcde
Drive Status:
Enabled
Encryption Status:
Encrypted
Encrypted
indicates that the HP Secure Hard Disk is locked to the printer/MFP. If the HP Secure
Hard Disk is removed from the printer/MFP, the data is unreadable.
NOTE:
Automatic locking is enabled by default. Once installed, the HP Secure Hard Disk
automatically locks to the printer/MFP.
4.
If you installed the HP Secure Hard Disk in an existing printer/MFP, and the status does
not
display
the
Hard Disk
,
Drive Status
, and
Encryption Status
fields, verify that the printer/MFP firmware
was updated.
ENWW
Confirm HP Secure Hard Disk operation
19
Summary of Contents for High-Performance Secure Hard Disk
