HP High-Performance Secure Hard Disk, Setup Manual

Page: 11 / 54

2 Installation
Use the information in this section to install the HP Secure Hard Disk in your compatible printer/MFP.
Once installed, you can use the HP embedded Web server (or HP Web Jetadmin) to manage the
HP Secure Hard Disk.
CAUTION: Your HP Secure Hard Disk contains electronic components that might be damaged
by static electricity through electrostatic discharge (ESD). To prevent ESD damage, maintain
frequent contact with any bare sheet metal surface on the printer. A grounding wrist strap (or similar
device) is useful for this purpose. Handle the device carefully at all times. Avoid touching electronic
components or circuit paths
●
What you need for installation
● Check printer/MFP operation
●
Backup data and note configuration settings
● Erase existing hard disk data
●
Install the EIO HP Secure Hard Disk (J8019A)
● Install the HP Secure Hard Disk lock adapter
●
Install the HP Secure Hard Disk (J8018A)
● Confirm HP Secure Hard Disk operation
●
Restore data and reinstall applications
What you need for installation
●
An HP printer/MFP with an available EIO slot or hard disk drive bay that supports an HP Secure
Hard Disk. See
Table 1-1 Supported printers/MFPs on page 3 for a list of supported printers, MFPs,
and digital senders.
The HP printer/MFP must be functioning properly. If required, use the setup or installation guides
provided to assemble and test the printer/MFP.
ENWW What you need for installation 5