953
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
ip-address
: Specifies a permitted sender IP address.
mac-address
: Specifies a permitted sender MAC address.
Usage guidelines
If the sender IP and MAC addresses of an ARP packet match an ARP permitted entry, the ARP
packet is permitted. If not, it is discarded.
You can configure a maximum of eight ARP permitted entries on an interface.
You cannot configure both the
arp filter source
and
arp filter binding
commands on the same
interface.
Examples
# Enable ARP filtering and configure an ARP permitted entry.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] arp filter binding 1.1.1.1 2-2-2
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...