509
Syntax
sa idle-time seconds
undo sa idle-time
Default
An IPsec policy, IPsec policy template, or IPsec profile uses the global IPsec SA idle timeout.
Views
IPsec policy view
IPsec policy template view
IPsec profile view
Predefined user roles
network-admin
Parameters
seconds
: Specifies the IPsec SA idle timeout in the range of 60 to 86400 seconds.
Usage guidelines
This feature applies only to IPsec SAs negotiated by IKE and takes effect after the
ipsec sa
idle-time
command is configured.
The IPsec SA idle timeout configured by this command takes precedence over the global IPsec SA
timeout configured by the
ipsec sa idle-time
command. If the IPsec policy, IPsec policy template, or
IPsec profile is not configured with the SA idle timeout, IKE uses the global SA idle timeout.
Examples
# Set the IPsec SA idle timeout to 600 seconds for the IPsec policy
map
.
<Sysname> system-view
[Sysname] ipsec policy map 100 isakmp
[Sysname-ipsec-policy-isakmp-map-100] sa idle-time 600
Related commands
display ipsec sa
ipsec sa idle-time
sa spi
Use
sa spi
to configure an SPI for IPsec SAs.
Use
undo sa spi
to remove the SPI.
Syntax
sa
spi
{
inbound
|
outbound
} {
ah
|
esp
}
spi-number
undo
sa
spi
{
inbound
|
outbound
} {
ah
|
esp
}
Default
No SPI is configured for IPsec SAs.
Views
IPsec policy view
IPsec profile view
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
