HP FlexNetwork MSR Series Command Reference Manual Download Page 701

Page: 701 / 1005

683

Syntax

display app-group

[

name

group-name

]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name

group-name

: Specifies an application group by its name. The

group-name

argument is a

case-insensitive string of 1 to 63 characters. The names

invalid

and

other

are not allowed. If you do

not specify any parameters, this command displays information about all application groups.

Examples

# Display information about all application groups.

<Sysname> display app-group

Group Name Type Group ID

6767 User-defined 0x00800002

er User-defined 0x00800001

hbc User-defined 0x00800003

# Display information about application group

<Sysname> display app-group name er

Group English name: er

Group Chinese name: er

Group ID: 0x00800001

Type: User-defined

Application count: 2

Include application list:

Application name Type App ID

114Travel Pre-defined 0x0000542c

banc User-defined 0x00800001

Table 94 Command output

Field

Description

Type

Application protocol attribute:

•

Pre-defined

•

User-defined

This filed always displays

User-defined

for

application groups.

Application count

Number of application protocols in the application
group.

Include application list

Application protocol list.

Application name

Application protocol name.

App ID

Application protocol ID.

Summary of Contents for FlexNetwork MSR Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexNetwork MSR Series

Reviews:

HP FlexNetwork MSR Series, Command Reference Manual, Page: 701 / 1005

Search results

Summary of Contents for FlexNetwork MSR Series

Reviews: