![HP FlexNetwork MSR Series Command Reference Manual Download Page 794](http://html.mh-extra.com/html/hp/flexnetwork-msr-series/flexnetwork-msr-series_command-reference-manual_163078794.webp)
776
<Sysname> display connection-limit stat-nodes global chassis 1 slot 2 count
Slot 2 in chassis 1:
Current limit statistic nodes count is 0.
Table 115 Command output
Field
Description
Src IP address
Source IP address.
Dst IP address
Destination IP address.
VPN instance
MPLS L3VPN instance to which the IP address belongs. Two hyphens (--)
indicates that the IP address is on the public network.
DS-Lite tunnel peer
Peer IP address of the DS-Lite tunnel. Two hyphens (--) indicates that the
connection does not belong to a DS-Lite tunnel.
Service
Protocol name and service port number.
For an unwell-known protocol, this field displays
unknown(xx)
. The cross signs
(xx) represents the protocol number. For the ICMP protocol, the protocol number
is the decimal digits that are converted from the hexadecimal contents of the type
and code fields.
Sessions
threshold
Hi/Lo
Upper and lower connection limits.
Sessions count
Number of current connections.
Sessions limit rate
Maximum number of connections established per second.
New session flag
Whether or not new connections can be created:
•
Permit
—New connections can be created.
•
Deny
—New connections cannot be created.
NOTE:
When the number of connections reaches the upper limit, this field displays
Permit
although new connections are not allowed. This field displays
Deny
only
when the number of connections exceeds the upper limit.
Related commands
connection-limit apply global policy
connection-limit apply policy
connection-limit policy
limit
limit
Use
limit
to configure a connection limit rule.
Use
undo limit
to remove the specified connection limit rule.
Syntax
In IPv4 connection limit policy view:
limit
limit-id
acl
[
ipv6
] {
acl-number
|
name
acl-name
} [
per-destination
|
per-service
|
per-source
] * {
amount
max-amount min-amount
|
rate
rate
} * [
description
text
]
limit
limit-id
acl
ipv6
{
acl-number
|
name
acl-name
}
per-ds-lite-b4
{
amount
max-amount
min-amount
|
rate
rate
} * [
description
text
]
undo limit limit-id
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...