26
3.
Insert one end of the wire marked with “+” into the terminal marked with “+”, and fasten the
screw to fix the cord.
Figure 28 Attaching the wires to the terminal block
4.
Correctly orient the terminal block and insert it into the power supply, and fasten the captive
screws with a Phillips screwdriver.
Figure 29 Installing the terminal block on the power supply
5.
Connect the other ends of the wires to the DC power source wiring terminals, with the negative
wire (– or L–) to the negative terminal block (–) and the positive wire (+ or M/N) to the positive
terminal block (+).
6.
Use cable ties to secure the power cords to the rack post.