manualshive.com logo in svg

HP FlexNetwork HSR6802, Installation Manual, Page: 123 / 138

Share
Download
HP FlexNetwork HSR6802 Installation Manual Download Page 123

 

117 

Figure 102 SAP-20GE2XP LEDs 

 

 

Table 65 SAP-20GE2XP LED description 

LED Status 

Description 

 

(green) 

RUN 

Off 

No power input is available or the SAP-20GE2XP 
has failed. 

Slow flashing (1 Hz) 

The SAP-20GE2XP is operating correctly. 

Fast flashing (8 Hz) 

System software is being loaded or the 
SAP-20GE2XP is not operating. 

 CAUTION: 

To avoid hardware damage, do not power off the 
router, or insert or remove the SAP-20GE2XP 
when system software is being loaded. 

 

(yellow/green) 

Status 
LEDs for 
SFP+ port 
0 and 
SFP+ port 
1 

Off 

No link is present. 

Steady green 

A 10 Gbps link is present. 

Flashing green 

Data is being received or transmitted at 10 Gbps.

Steady yellow 

The transceiver module has failed to be detected.

 

(yellow/green) 

Status 
LEDs for 
combo 
fiber ports 
GE16 to 
GE19 

Off 

No link is present. 

Steady green 

A 1000 Mbps link is present. 

Flashing green 

Data is being received or transmitted at 1000 
Mbps. 

Steady yellow 

A 100 Mbps link is present. 

Flashing yellow 

Data is being received or transmitted at 100 Mbps.

 

(yellow/green) 

Status 
LEDs for 
combo 
copper 
ports GE16 
to GE19 

Off 

No link is present. 

Steady green 

A 1000 Mbps link is present. 

Flashing green 

Data is being received or transmitted at 1000 
Mbps. 

Steady yellow 

A 10/100 Mbps link is present. 

Flashing yellow 

Data is being received or transmitted at 10/100 
Mbps. 

 

(yellow/green) 

Status 
LEDs for 
SFP ports 
GE0 to 
GE15 

Off 

No link is present. 

Steady green 

A 1000 Mbps link is present. 

Flashing green 

Data is being received or transmitted at 1000 
Mbps. 

Steady yellow 

A 100 Mbps link is present. 

Flashing yellow 

Data is being received or transmitted at 100 Mbps.

 

Summary of Contents for FlexNetwork HSR6802











































































































































Reviews:

No comments