391
Step Command
Remarks
5.
Enter BGP-VPNv6
subaddress family view.
ipv6-family vpnv6
N/A
6.
Set the default value of the
local preference.
default local-preference
value
Optional.
100 by default.
7.
Set the default value for the
system MED.
default med
med-value
Optional.
By default, the default value of the
system MED is 0.
8.
Configure a filtering policy to
filter routes to be advertised.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
direct
|
isisv6
process-id
|
ripng
process-id
|
static
]
Optional.
By default, the PE does not filter
routes to be advertised.
9.
Configure a filtering policy to
filter received routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
Optional.
By default, the PE does not filter
received routes.
10.
Apply a filtering policy for the
peer.
peer
ip-address
filter-policy
acl6-number
{
export
|
import
}
Optional.
By default, no filtering policy is
applied for a peer.
11.
Apply an IPv6-prefix list for
the peer to filter
received/advertised routes.
peer
ip-address
ipv6-prefix
prefix-name
{
export
|
import
}
Optional.
By default, no IPv6 prefix list is
applied for a peer.
12.
Specify not to change the
next hop of a route when
advertising it to a peer.
peer
ip-address
next-hop-invariable
Optional.
By default, a device uses its
address as the next hop when
advertising a route to its EBGP
peer.
13.
Specify the preference value
for the routes received from
the peer.
peer
ip-address
preferred-value
value
Optional.
0 by default.
14.
Configure BGP updates to
the peer to not carry private
AS numbers.
peer
ip-address
public-as-only
Optional.
By default, a BGP update carries
private AS numbers.
15.
Apply a routing policy for the
peer.
peer
ip-address
route-policy
route-policy-name
{
export
|
import
}
Optional.
By default, no routing policy is
applied for a peer.
16.
Enable route target filtering
for received BGP-VPNv6
subaddress family routes.
policy vpn-target
Optional.
Enabled by default.
17.
Configure the local PE as the
route reflector and specify
the peer as the client.
peer
ip-address
reflect-client
Optional.
No route reflector or client is
configured by default.
18.
Enable route reflection
between clients.
reflect between-clients
Optional.
Enabled by default.