287
Perform the following configuration tasks on MCE. Configurations on the PE are similar to those on
the PE in common MPLS L3VPN network solutions (see "
Configuring static routing between a PE
Configuring static routing between MCE and PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure a static route
for a VPN instance.
•
ip
route-static
dest-address
{
mask
|
mask-length
} {
gateway-address
|
interface-type
interface-number
[
gateway-address
] |
vpn-instance
d-vpn-instance-name
gateway-address
} [
preference
preference-value
] [
tag
tag-value
] [
description
description-text
]
•
ip route-static
vpn-instance
s-vpn-instance-name&
<1-6
>
dest-address
{
mask
|
mask-length
} {
gateway-address
[
public
] |
interface-type interface-number
[
gateway-address
] |
vpn-instance
d-vpn-instance-name gateway-address
}
[
preference
preference-value
] [
tag
tag-value
]
[
description
description-text
]
Use either
command as
needed.
3.
Configure the default
precedence for static
routes.
ip route-static default-preference
default-preference-value
Optional.
60 by default.
Configuring RIP between MCE and PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a RIP process
for a VPN instance and
enter RIP view.
rip
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Enable RIP on the
interface attached to
the specified network.
network
network-address
By default, RIP is disabled
on an interface.
4.
Redistribute the VPN
routes.
import-route
protocol
[
process-id
]
[
allow-ibgp
] [
cost
cost
|
route-policy
route-policy-name
|
tag
tag
] *
By default, no route of any
other routing protocol is
redistributed into RIP.
5.
Configure the default
cost value for the
redistributed routes.
default cost
value
Optional.
0 by default.
For more information about RIP, see
Layer 3—IP Routing Configuration Guide
.
Configuring OSPF between MCE and PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an OSPF process for
a VPN instance and enter
OSPF view.
ospf
[
process-id
|
router-id
router-id
|
vpn-instance
vpn-instance-name
] *
N/A