79
Figure 59
Replacing a CF card
Replacing a transceiver module
Replacing the XFP, SFP+, SFP, and QSFP+ modules
CAUTION:
Do not touch the golden finger of a transceiver module during replacement.
The replacement procedures for the XFP, SFP, SFP+, and QSFP+ modules are similar. This section uses an
SFP+ module as an example.
To replace a transceiver module:
1.
Put on an ESD wrist strap, making sure that the strap makes good skin contact and is correctly
grounded.
2.
Remove the optical fibers from the SFP+ module, pivot the clasp down to the horizontal position,
and then pull the SFP+ module out of the port, as shown in
