34
To connect the PSE20KA1 AC power cords:
1.
Secure the power cabling rack to the power frame using screws with spring washers and flat
washers.
Figure 30
Installing the power cabling rack
2.
Insert the connector of an AC power cord into the power receptacle.
3.
Secure the AC power cord to the cabling rack with cable ties.
4.
Repeat steps 2 and 3 to organize and secure other AC power cords.
5.
Connect the other end of the AC power cords to the power source.
Figure 31
Connecting AC power cords
Connecting a DC power cord
CAUTION:
A plastic protection cover is installed in front of the terminal block to protect operators from being shocked.
Remove the protection cover before connecting power cords and then install the protection cover
promptly.
16A
5
1
2
4
3