59
Configuring temperature thresholds for a card
Step Command
1.
Enter system view.
system-view
2.
Configure temperature alarm
thresholds for a card.
•
In standalone mode:
temperature-limit slot
slot-number
{
inflow
|
hotspot | outflow
}
sensor-num
lowerlimit warninglimit
[
alarmlimit
]
•
In IRF mode:
temperature-limit chassis
chassis-number
slot
slot-number
{
inflow
|
hotspot | outflow
}
sensor-num
lowerlimit warninglimit
[
alarmlimit
]
Displaying the temperature information on your switch
Use the
display environment
command to display the temperature information of the sensors on the cards,
including the current temperature and temperature thresholds.
# Display the temperature information of the cards on the switch.
<Sysname> display environment
•
In standalone mode:
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit
1 inflow 1 21 -25 70 80 N/A
1 outflow 1 24 -15 70 85 N/A
1 hotspot 1 27 -15 75 85 N/A
5 inflow 1 27 -20 65 85 N/A
5 outflow 1 27 0 70 85 N/A
5 hotspot 1 30 -10 70 80 N/A
12 inflow 1 23 -10 55 80 N/A
12 outflow 1 42 5 85 95 N/A
•
In IRF mode:
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit
1/1 inflow 1 21 -25 70 80 N/A
1/1 outflow 1 24 -15 70 85 N/A
1/1 hotspot 1 27 -15 75 85 N/A
1/5 inflow 1 27 -20 65 85 N/A
1/5 outflow 1 27 0 70 85 N/A
1/5 hotspot 1 30 -10 70 80 N/A
1/12 inflow 1 23 -10 55 80 N/A
1/12 outflow 1 42 5 85 95 N/A
