HP ENVY 17, Getting Started

Page: 15 / 76

●
Disconnect Projector only mode—Turns off the external display and
displays the image only on the computer display.
●
Duplicate mode—Clones the computer display onto an external
display that is connected to the external monitor port (VGA) on the
computer.
●
Extend mode—Extends the desktop to all connected external
displays along with the computer display.
● Projector only mode—Turns off the computer display and sets all
connected external displays to extended desktop.
NOTE:
You can manage the video output and default output devices
using the ATI Catalyst Control Center. Refer to Using the ATI Catalyst
Control Center on page 4 .
Using the ATI Catalyst Control Center
To configure desktops and displays and to manage ATI Eyefinity, you
must use the ATI Catalyst
TM
Control Center.
To access the ATI Catalyst Control Center:
1. Select Start > All Programs > Catalyst Control Center .
2. Click the Graphics arrow, and then select Desktops and Displays .
NOTE:
For additional information on using the ATI Catalyst Control
Center, refer to the software Help.
4 Chapter 1 Welcome