A screen capture is saved in the clipboard.
4. (Optional) Paste the screen capture into an image editor.
Remote console hot keys
The
Hot Keys page allows you to define up to six hot keys to use during remote console sessions. Each hot key represents
a combination of up to five keys. The key combination is sent to the host server when the hot key is pressed. Hot keys are
active during remote console sessions that use the integrated remote console and the text-based remote console.
If a hot key is not set—for example,
Ctrl+V is set to NONE, NONE, NONE, NONE, NONE—this hot key is disabled. The
server operating system will interpret
Ctrl+V as it usually does (paste, in this example). If you set Ctrl+V to use another
combination of keys, the server operating system will use the key combination set in iLO (losing the paste functionality).
Example 1: If you want to send Alt+F4 to the remote server, but pressing that key combination closes your browser, you
can configure the hot key
Ctrl+X to send the Alt+F4 key combination to the remote server. After you configure the hot
key, press
Ctrl+X in the remote console window when you want to send Alt+F4 to the remote server.
Example 2: If you want to create a hot key to send the international AltGR key to the remote server, use R_ALT in the key
list.
NOTE: If will you do a lot of typing in remote console sessions, you might want to avoid assigning hot keys that use Ctrl
+X and Ctrl+V shortcuts. These shortcuts are normally assigned to the cut and paste features.
Creating remote console hot keys
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Remote Console & Media in the navigation tree, and then click the Hot Keys tab.
2. For each hot key that you want to create, select the key combination to send to the remote server.
To configure hot keys to generate key sequences from international keyboards, select the key on a U.S. keyboard that
is in the same position as the key on the international keyboard.
Keys for configuring remote console computer lock
keys and hot keys lists the keys you can use when you configure hot keys.
3. Click Save Hot Keys.
iLO confirms that the hot key settings were updated successfully.
Keys for configuring remote console computer lock keys and hot keys
The following keys are supported when you configure remote console hot keys and remote console computer lock keys.
ESC
SCRL LCK
0
f
L_ALT
SYS RQ
1
g
R_ALT
PRINT SCREEN
2
h
L_SHIFT
F1
3
I
Table Continued
Using HPE iLO 5
93
