Removing all components from the iLO Repository
Prerequisites
• Configure iLO Settings privilege
• The components are not in an install set.
• The components are not part of a queued task.
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click the iLO Repository tab.
2. Click Remove all.
iLO prompts you to confirm the request.
3. Click Yes, remove all.
The components are removed.
Viewing iLO Repository summary and component details
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click the iLO Repository tab.
2. (Optional) To sort by a table column, click the column heading.
To change the sort order to ascending or descending, click the column heading again or click the arrow icon next to
the column heading.
3. (Optional) To view detailed component information, click an individual component.
iLO Repository storage details
The
Summary section of the iLO Repository page displays the following details about the iLO Repository storage use:
•
Capacity—Total iLO Repository storage capacity
•
In use—Used storage
•
Free space—Available iLO Repository storage
•
Components—Number of saved components in the iLO Repository
iLO Repository contents
The
Contents section of the iLO Repository page displays the following details about each firmware or software
component:
•
Name
•
Version
iLO Repository individual component details
When you click an individual component, the following details are displayed:
Using HPE iLO 5
57
