manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Hardware Reference Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Rear panel components

1

PS/2 Mouse Connector (green)

7

PS/2 Keyboard Connector (purple)

2

Serial Connector

8

DisplayPort Monitor Connectors

3

RJ-45 Network Connector

9

VGA Monitor Connector

4

USB 2.0 Ports with Wake from S4/S5 feature

(black)

10

USB 3.0 Ports (blue)

5

Line-In Audio Connector (blue)

11

USB 2.0 Ports (black)

6

 

Power Cord Connector

12

Line-Out Connector for powered audio

devices (green)

NOTE:

An optional second serial port and an optional parallel port are available from HP.

If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wake from S4/S5

feature. The wake from S4/S5 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup.

When a device is plugged into the blue Line-In Audio Connector, a dialog box will pop up asking if you want to use the

connector for a line-in device or a microphone. You can reconfigure the connector at any time by double-clicking the Audio

Manager icon in the Windows taskbar.

When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the

integrated graphics on the system board may be used at the same time. However, for such a configuration, only the display

connected to the discrete graphics card will display POST messages.

The system board graphics can be disabled by changing settings in Computer Setup.

Rear panel components

3

Summary of Contents for EliteDesk 705 G2 Desktop Mini



























































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands