HP EliteDesk 705 G2 Desktop Mini Hardware Reference Manual Download Page 57

Page: 57 / 58

D Accessibility

HP designs, produces, and markets products and services that can be used by everyone, including people

with disabilities, either on a stand-alone basis or with appropriate assistive devices.

Supported assistive technologies

HP products support a wide variety of operating system assistive technologies and can be configured to work

with additional assistive technologies. Use the Search feature on your device to locate more information

about assistive features.

NOTE:

For additional information about a particular assistive technology product, contact customer

support for that product.

Contacting support

We are constantly refining the accessibility of our products and services and welcome feedback from users. If

you have an issue with a product or would like to tell us about accessibility features that have helped you,

please contact us at (888) 259-5707, Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. If you are deaf

or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical support or have

accessibility questions by calling (877) 656-7058, Monday through Friday, 6 a.m. to 9 p.m. North American

Mountain Time.

NOTE:

Support is in English only.

Supported assistive technologies

Summary of Contents for EliteDesk 705 G2 Desktop Mini



























































Search results

Summary of Contents for EliteDesk 705 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

HP EliteDesk 705 G2 Desktop Mini, Hardware Reference Manual

Search results

Summary of Contents for EliteDesk 705 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands