manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Hardware Reference Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Appendix A  Battery replacement ..................................................................................................................... 45

Appendix B  Electrostatic discharge .................................................................................................................. 48

Preventing electrostatic damage ........................................................................................................................ 48
Grounding methods ............................................................................................................................................. 48

Appendix C  Computer operating guidelines, routine care and shipping preparation ............................................. 49

Computer operating guidelines and routine care ............................................................................................... 49
Optical drive precautions .................................................................................................................................... 50

Operation ........................................................................................................................................... 50
Cleaning ............................................................................................................................................. 50
Safety ................................................................................................................................................ 50

Shipping preparation ........................................................................................................................................... 50

Appendix D  Accessibility ................................................................................................................................. 51

Supported assistive technologies ....................................................................................................................... 51
Contacting support .............................................................................................................................................. 51

Index ............................................................................................................................................................. 52

vi

Summary of Contents for EliteDesk 705 G2 Desktop Mini



























































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands