manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Hardware Reference Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

12.

To install a new expansion card, hold the card just above the expansion socket on the system board

then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the

open slot on the rear of the chassis. Press the card straight down into the expansion socket on the

system board (2).

NOTE:

When installing an expansion card, press firmly on the card so that the whole connector seats

properly in the expansion card socket.

13.

Rotate the slot cover retention latch back in place to secure the expansion card.

14.

Connect external cables to the installed card, if needed. Connect internal cables to the system board, if

needed.

15.

Replace the computer access panel.

16.

If the computer was on a stand, replace the stand.

17.

Reconnect the power cord and any external devices, and then turn on the computer.

Removing or installing an expansion card

19

Summary of Contents for EliteDesk 705 G2 Desktop Mini



























































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands