manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Hardware Reference Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Front panel components

Drive configuration may vary by model. Some models have a bezel blank covering the slim optical drive bay.

1

Slim Optical Drive (optional)

6

Headphone Connector

2

USB 2.0 Charging (powered) Port (black)

7

Dual-State Power Button

3

USB 2.0 Port (black)

8

Hard Drive Activity Light

4

USB 3.0 Ports (blue)

9

SD Card Reader (optional)

5

Microphone/Headphone Connector

 

 

NOTE:

When a device is plugged into the Microphone/Headphone Connector, a dialog box will pop up asking if you want

to use the connector for a microphone line-In device or a headphone. You can reconfigure the connector at any time by

double-clicking the Audio Manager icon in the Windows taskbar.

NOTE:

The USB 2.0 Charging Port also provides current to charge a device such as a Smart Phone. The charging current is

available whenever the power cord is plugged into the system, even when the system is off.

NOTE:

The Power On Light is normally white when the power is on. If it is flashing red, there is a problem with the

computer and it is displaying a diagnostic code. Refer to the 

Maintenance and Service Guide

 to interpret the code.

2

Chapter 1   Product features

Summary of Contents for EliteDesk 705 G2 Desktop Mini



























































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands