HP EliteBook 8460p Reference Manual Download Page 43

Page: 43 / 105

External cards and devices

Using Media Card Reader cards (select models only)

Optional digital cards provide secure data storage and convenient data sharing. These cards are
often used with digital media–equipped cameras and PDAs as well as with other computers.

To determine the digital card formats that are supported on your computer, refer to the

Getting

Started

guide.

Inserting a digital card

CAUTION:

To reduce the risk of damage to the digital card connectors, use minimal force to insert

a digital card.

Hold the card label-side up, with the connectors facing the computer.

Insert the card into the Media Card Reader, and then press in on the card until it is firmly seated.

You will hear a sound when the device has been detected, and a menu of options may be
displayed.

Using Media Card Reader cards (select models only)

Summary of Contents for EliteBook 8460p










































































































Search results

Summary of Contents for EliteBook 8460p

Reviews:

Related manuals for EliteBook 8460p

Brands by name

Popular brands

HP EliteBook 8460p, Reference Manual

Search results

Summary of Contents for EliteBook 8460p

Reviews:

Related manuals for EliteBook 8460p

Brands by name

Popular brands