HP Elite x2 1011 G1 User Manual Download

Page: 88 / 103

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the

download is complete. If no instructions are revealed, follow these steps:

From the Start screen, type

file

, and then select File Explorer.

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

Double-click the file that has an .exe extension (for example,

filename.exe).

The BIOS installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Synchronizing the tablet and keyboard

When you attach the tablet to the keyboard and restart the computer, the BIOS checks to see if the

Embedded Controller firmware on the keyboard needs to be synchronized, and will start the

synchronization. If the synchronization is interrupted, a notification screen displays for 10 seconds

before the tablet restarts and attempts to synchronize again.

NOTE:

The Embedded Controller firmware will only synchronize if the tablet or keyboard battery is

more than 50% charged, or if your tablet is connected to AC power.

Using MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility,

which is enabled at the factory, controls the order in which the system selects a boot device. Boot

devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and

USB devices. Boot devices contain bootable media or files that the computer needs to start and

operate properly.

NOTE:

Some boot devices must be enabled in Computer Setup before they can be included in the

boot order.
You can change the order in which the computer searches for a boot device by changing the boot

order in Computer Setup. You can also press

esc

or the volume down button while the “Hold the

Volume Down button to enter the BIOS Startup Menu” message is displayed at the bottom of the

screen, and then press or tap

. Selecting

displays a menu that shows the current boot devices

and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to

prompt you for a boot location each time the computer turns on or restarts.

78 Chapter 11 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)

Summary of Contents for Elite x2 1011 G1








































































































Search results

Summary of Contents for Elite x2 1011 G1

Reviews:

Related manuals for Elite x2 1011 G1

Brands by name

Popular brands

HP Elite x2 1011 G1, User Manual

Search results

Summary of Contents for Elite x2 1011 G1

Reviews:

Related manuals for Elite x2 1011 G1

Brands by name

Popular brands