g.
When installing a display panel, be sure to install the Mylar and the adhesive strips along the right
and left sides of the inside of the display back cover as shown in the following illustration.
14.
To remove the camera module:
a.
Remove the three Phillips M2.0 × 2.0 screws (1) from the top bracket, and then remove the bracket
from the display back cover (2).
b.
Use a tool to detach the camera module (1) from the display back cover. (The module is attached
with double-sided adhesive.) Note that the camera routes under the camera so that you must
remove the camera before you can disconnect the cable.
c.
Disconnect the cable from the module (2). Note that the camera routes under the camera.
The camera module is available as spare part number N12929-001.
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
