WARNING!
To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work or shut down the computer through Windows
before you remove the battery.
Remove the battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the five Phillips M2.0 × 4.0 screws (2) that secure the battery to the computer.
3.
Remove the battery from the computer (3).
To replace the battery, reverse the removal procedures.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-3
Solid-state drive descriptions and part numbers
Description
Spare part number
512 GB
N17382-001
256 GB
N17381-001
128 GB
N17380-001
Solid-state drive bracket (available in the Bracket Kit)
N18576-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 28
2.
Remove the bottom cover (see
Solid-state drive
31
