HP Elite c645 G2 Chromebook Maintenance And Service Manual Download

Page: 53 / 81

●

Keyboard backlight cable (ZIF) (7) (select products only)

●

Fingerprint reader cable (ZIF) (8) (select products only)

●

USB cables (ZIF) from the USB board (9)

●

Antenna cables from the WWAN module (10) (select products only)

NOTE:

System board and component appearance might vary.

Remove the two Phillips M2.0 × 3.0 screws (1) from the bracket, and then remove the bracket (2).

Remove the Mylar that covers the Phillips M2.0 × 2.5 screw at the top of the system board, and then

remove the screw (3).

Remove the two remaining Phillips M2.0 × 2.5 screws (4) that secure the system board to the computer.

Release the USB cables from the computer chassis (5).

Lift the left side of system board (6), and then pull the system board left and away from the connectors

to remove it from the computer (7).

NOTE:

Models with WWAN shown.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite c645 G2 Chromebook


















































































Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands

HP Elite c645 G2 Chromebook, Maintenance And Service Manual

Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands