manualshive.com logo in svg

HP Elite c645 G2 Chromebook, Maintenance And Service Manual

Share
Download
HP Elite c645 G2 Chromebook Maintenance And Service Manual Download Page 42

Table 5-6

Speaker description and part number

Description

Spare part number

Speaker Kit

N12919-001

Before removing the speakers, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 28

).

2.

Remove the bottom cover (see 

Bottom cover on page 28

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 30

).

Remove the speakers:

1.

Disconnect the speaker cables from the system board (1).

2.

Remove the two Phillips M2.0 × 5.0 screws from each speaker (2).

3.

Remove the speakers from the computer (3).

NOTE:

When installing the speakers, be sure that the rubber washers (4) are installed with each screw.

To install the speaker, reverse this procedure.

Fan

To remove the fan, use this procedure and illustration.

Table 5-7

Fan description and part number

Description

Spare part number

Fan

N12918-001

Fan

37

Summary of Contents for Elite c645 G2 Chromebook


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands