HP Elite c645 G2 Chromebook Maintenance And Service Manual Download

Page: 49 / 81

Table 5-12

Fingerprint reader and board description and part number (continued)

Description

Spare part number

Fingerprint reader bracket (available in the Bracket Kit)

N18576-001

Fingerprint reader insert (available in the Miscellaneous Parts Kit

N14812-001

Before removing the fingerprint reader and board, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 28

Remove the bottom cover (see

Bottom cover on page 28

Remove the battery (see

Battery on page 30

Remove the fingerprint reader and board:

Disconnect the cable from the ZIF connector on the right side of the fingerprint reader board (1).

Disconnect the cable from the ZIF connector on the left side of the board (2).

Remove the board from the computer (3).

Disconnect the cable from the ZIF connector on the fingerprint reader board (1).

Remove the two Phillips M2.0 × 2.0 screws (2) that secure the fingerprint reader bracket to the computer,

and then remove the bracket (3).

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite c645 G2 Chromebook


















































































Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands

HP Elite c645 G2 Chromebook, Maintenance And Service Manual

Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands