1
1 Installation Overview
This user guide contains instructions for installing and configuring the
HP NetServer E 30 and E 40. Please note that there are places in this guide that
contain information unique to the E 30 or E 40. These sections are titles with the
phrase "E 30 Only" or "E 40 Only". Read only whichever section is appropriate
for your NetServer.
This chapter contains simplified setup information about your HP E Series
NetServer. For complete setup instructions, consult the road map for your
HP E Series NetServer.
Verify Contents
Unpack and verify the contents of the shipping box against the Contents Checklist
included with your NetServer. If anything is missing or damaged, contact your
reseller.
View the README File
1. Press the power-on button. Open the NetServer front door and press the
CD-ROM drive eject button. Place the HP NetServer Navigator CD-ROM
in the drive and press the eject button again to close the drive. Turn the
power off, wait 10 seconds and turn the power on again. If the system fails
to boot, follow the diagnostic instructions on the screen.
2. Go to the Navigator Main Menu. If the language needs to be changed,
select "Set Preferences."
3. Select "README File." The README file contains the latest information
to help you install your HP NetServer. Read it carefully before beginning
your installation.
You can now boot the Navigator CD-ROM and run Diagnostic Assistant if
you want to verify system operation as shipped.
4. If you are installing additional hardware, such as memory, accessory
boards, or mass storage devices, you will need to remove the cover. Go to
"Remove the Cover."
If you are not installing additional hardware, go to "Configure the HP
NetServer."