Repair Strategy
The repair strategy for this preprocessor interface is board replacement.
However, the following table lists some mechanical parts that may be
replaced if they are damaged or lost. Contact your nearest Hewlett-Packard
Sales Office for further information on servicing the board.
Exchange assemblies are available when a repairable assembly is returned to
Hewlett-Packard. These assemblies have been set up on the "Exchange
Assembly" program. This allows you to exchange a faulty assembly with one
that has been repaired, calibrated, and performance verified by the factory.
The cost is significantly less than that of a new assembly.
Table 10. Replaceable Parts
HP Part Number
Description
E2466-69509
Preprocessor Interface Circuit Board
E2466-68707
Software disk pouch
E2466-61601
Probe Cable
E2466-61201
Alignment Clamp
E2466-63201
Interposer Adapter
E2466-68501
Fan and Heat Sink Assembly
Preprocessor Interface Hardware Reference
Repair Strategy
Preprocessor Interface for the Pentium II Processor
3-23
Summary of Contents for E2466C
